Includes Our WIDE RIDE IFS Front Suspension:  Black powdercoated upper & Lower a-arms with bushings and ball joints.

Add to that, our new ZG Spindles with Huge 12" Brakes with your choice of bolt pattern, and all of the seals, bearings, pads, and calipers.                 * Power Rack & Pinion is standard with all mounts and outer tie rod ends.  You'll get a pair of Billet ROMIC Coilovers featuring external rebound adjustment and a set of springs matched to your truck.. We even include a front sway bar.

REAR SUSPENSION:  All BIG10 Chassis are designed to use our Trailing Arm Suspension, for the best performance and ride.  The Trailing Arms use our exclusive "monster ball" pivot in front for a smooth ride.  The Rear ROMIC Billet Coilovers are mounted on a rocker arm yielding a full 8" of travel, more ball pivots, rocker arms and billet rocker mounts, with bearings; coilover mounts, billet coilovers with matching springs, rocker links, and a panhard bar.  All hardware is included.

New CURRIE Heavy Duty 9" Housing with 31 Spline Axles.  We include the bearings and stud package with the bolt pattern of your choice.  We then weld in the Trailing Arm Mounts, rocker link mounts, and panhard rod mounts. This also includes: U-bolts, carrier studs, and gaskets, axle retainer, and T-bolts. 

This will easily hold 600 h.p., and deliver countless miles of worry free cruisin. 

BRAKE LINE PLUMBING:

We worked with Classic Atube to CNC bend all of the hardlines.  We machined special bulkhead fittings to be exactly what we wanted. We even made a nice billet T-block that also holds the brake light switch. 

Includes: 8" Dual Diaphram booster and corvette style master cylinder, braided stainless flex lines. Along with a Wilwood Adjustable proportioning valve and two residual check valves with our custom t-block.  Add to that, the brake light switch, fittings, line clamps, and all hardware

MOUNTS INCLUDED STANDARD

All of our BIG10 Chassis come with all of the cab mounts, core support mounts, bumper, and bed mounts. Along with the Motor and Transmission Mounts.  All BIG10 Chassis are        pre-drilled for brake systems, wiring mounts, fuel tank mounts, and exhaust mounts as well.

 OPTIONAL  UPGRADES                          

* Pro Rear Sytle- no charge.....$0.00

* Ring & Pinion Gears/ Posi Upgrade....................................$1295.00

* Wilwood Polished 12.19" Brakes - Drilled/ Slotted Front & Rear..$1215.00

* Upgrade to 13" Front Brakes and 14" Rear Brakes, Drilled/Slotted..$4195.00

* Hydroboost Power Brakes..$295.00

* "RIDETECH" Compressor System......................................$1695.00

* Upgrade to Shockwaves.....$900.00

* Air Tank & Compressor mnts.$125.00

* Add a No Limit Fuel Tank to frame - - - Carberated................................$489.00

* Add a No Limit Fuel Tank to frame - - - EFI Fuel Injected.......................$795.00

* Single Fuel Line Plumbing...$295.00

* No Limit Drop Out Stainless Steel Battery Box..............................$165.00

*Powdercoat Fee (1color).......$1200.00

*Re-assemble fee.....................$220.00

** Chromed Upper & Lower A-arms & Trailing Arms.............................$800.00

* Billet Center Housing.............$380.00

* Chrome Booster & M/C........$199.00