I.R.S. Rear Clip

This I.R.S. rear clip can be purchased to be grafted onto an existing chassis, this is the rear section of the frame.

I.R.S. Systems have a standard 61" WMS. We can build them at 59" WMS as well. No extra cost.

All I.R.S. carriers are 9" Ford 35 spline axle.

Wheel bolt pattern is 5 lug, 43/4 only

Any brakes for C5 or C6 Corvette will fit

The cradle-Custom built by No Limit Engineering

Lower Control Arm-1 1/2" x .134 Tubing, Large Shell Bushings, Trussed

Upper Control Arm-7075 T6 Spars, Modular Build, Full Adjustment

Upright-C5/C6 Corvette, including Ball Joints and Tie Rod Ends

Dutchman 9" Carrier with 35 Spline CV Stub Shafts

Porsche 934 Style High Travel CV Joints

Dutchman 33 Spline Axle Shafts

Corvette C7 Outer Hubs

Dutchman 33 Spline Outer CV Stubs

Ridetech Single Adjustable Shocks and Springs

Speedway Engineering 1 1/4" x 48 Spline Sway Bar w/ No Limit Arms

All Parts are rated at over 1,100 HP!

Brake options and Gear Set options are available

*THIS ITEM WILL HAVE TO BE SHIPPED BY A FREIGHT COMPANY. PLEASE CALL FOR A SHIPPING QUOTE*