PIONEERING THE FUTURE
OF HOT RODDING

For over 20 years, No Limit Engineering has changed the game of hot rodding. Our mission is to build the best performing parts for real world hot rods!

View Our ProductsAbout Us
NL

Welcome to No Limit Engineering

Our Most Popular Products

Pro-Tech Chassis

SKU PROCHASSIS
$12,150.00
In stock
1
Product Details

** IMPORTANT NOTICE - THIS ITEM MUST SHIP VIA FREIGHT. YOU WILL BE CONTACTED AFTER PURCHASE FOR SHIPPING COST. OR TO RECEIVE AN ACCURATE SHIPPING COST BEFORE PURCHASE, PLEASE CONTACT CUSTOMER SERVICE AT (865) 940-1503. **

Pro-Tech Chassis

1963-1966 C-10 1967-1972 C-10 1973-1987 C-1500

1961-72 Ford, 1973-1979 Ford


No Limit Pro-Tech Chassis will deliver the best in handling, ride quality, and performance for your classic hauler. Each Chassis is custom built to your specifications. These chassis include our famous No Limit Wide Ride IFS (which includes a power rack) with a 61 ½” track width and our proven No Limit Fat Bar 4-Link for the rear, which is a Moser H.D. 9” Ford with 31 Spline Axles. The main chassis platform is 2x6x.120 wall rails, with a stout 2x6x.188 wall x-member. Exhaust porting and a drive shaft loop is standard. The formed front and rear rail sections are 2x6 blended down to 2x4x.188 wall. Truss style engine mounts for SBC, BBC, and LS are standard. The Trans mounts are adjustable and can accept anything from a powerglide to a T-56 6 speed. (Aftermarket overdrive units will not fit)

Base Chassis includes the frame, cab, bed and bumper mounts, complete Wide Ride IFS front, and Fatbar rear suspension with billet coilovers. Moser H.D. housing and 31 spline axles. Rear Ford Explorer Brakes, Brake line plumbing (High Nickel Steel). Motor Adapter Plates, Motor Poly Mounts, Trans Poly Mount and Rack & Pinion Fittings.

Standard Rail Chassis-We build these frame rails to closely match the profile of the stock chassis. this makes the build process very easy. there are no body or bed modifications needed. The body will fit using OE or upgraded aftermarket body mounts, all in stock locations. These chassis usually have a ride height of 8" to 10" at the bottom of the rocker or running board.

Raised Rail Chassis-If you want it LOW, this is it. But, cool comes with a price. These chassis still use OE style body mounts but the bed floor (inside the box) must be raised 4" to 5" to clear the higher frame rails. Also, there may be a little trans tunnel work required, depending on the transmission used. We include all body and bed mounts to help make it easier. These chassis usually have a ride height of 5" to 6" at the bottom of the rocker or running board.

Coil-Over Shocks-You have a choice of Ride tech single adjustable or Viking double adjustable coil-over shocks with the base chassis. Which shock you want depends on how you plan on driving your truck.

Ride Tech-Single Adjustable (rebound only). These are a great shock, with excellent response and very precise handling. Think Corvette. If you're a corner carver, this is it.

Viking-Double Adjustable (rebound and compression). Great ride and handling. Compression side adjustment may allow for a better Drag launch. Great for a cruiser as well as some spirited track time.

Air Ride Chassis-So you want to go REALLY LOW? We can do air ride two ways 1-Firestone Air Bag and Viking Shocks 2-Ride Tech Shockwaves- or a combination of the two. You will want to call in and talk to us for this. Air Ride is very smooth and can also be set up to handle great. From the spec ride height, air ride systems can drop 4" to 5" when parked. We will not build a chassis to hit the ground. We try to limit the drop to 1" of ground clearance for safety. Remember, you will need an onboard compressor and control for this type of suspension. Air Ride is usually done on Raised Rail chassis, but can be fitted to any of our chassis.

Brakes-Our base chassis now included front and rear disc brakes, as well as brake line plumbing on the chassis. The base brake system is no slouch 12" drilled and slotted front rotors with a monster 2.938" floating GM caliper. The rear is a clone of the Ford Explorer 11.4" disc brake assemble, designed for big bearing 9" Ford rear axles. This also includes an internal Emergency brake. This is a well-balanced great stopping system. But if you want bigger flashier brakes, choose from one of our packages, depending on bolt patter and axle type.

Rear Axles-We offer three basic variation. Two solid axle styles and an IRS. There are a lot of options

Our standard axle is a Moser heavy duty stamped housing with Big Bearing ends and 31 spline axles. These can also be built with fabbed housings, added back brace, and a choice of 33,35, or 40 spline axles depending on the horse power level. Some may be better for cruisers and drag racers.

Floater Axles-Floating axles may be new to you, but not to the performance world. Using a floater hub (the hub and bearings are on the outer axle tube) the corner forces are kept on the housing tube, leaving the axles shaft to only deal with acceleration forces. While we can beef them up with fabbed housings and back braces. Floaters are limited to 31 axles. Floaters roll easier, with less drag and can easily take 850 HP with street tires. Autocrossers, Track day Warriors and Canyon Carvers, this is for you.

I.R.S.-this is the IRS the you will love. The ultimate in ride and handling. This will take your build to the next level. We use an aluminum carrier housing for a Ford 9" 35 spline gear set. Porche 934 style CV's with 33 spline inner shafts and Corvette c& outter hubs. Custom arms and stainless links round out the ultimate package. Rear splined sway bar is included. *This is a Raised Rail Chassis and the bed floor must be raised.

Sway Bars-Our base chassis all include a formed 1 1/4" front sway bar. these have an appx. 380lb bar rate. They are considered non-adjustable. *Pro Tech Raised Rail chassis are forced to upgrade to a splined front bar due to the chassis design. *We also offer splined front and rear bars as upgrades. Front bars can be 1 1/4" -48 spline, appx 445 lb bar rate or 1 3/4"-49 spline with appx 1140lb bar rate. Both are adjustable. The 1 1/4" bar is great all around choice. Hard core autocross and road course drivers will want to step up to the Big Bar. Rear bars are 3/4" solid bars with aluminum splined arms. this is plenty, any more than this will make the truck too loose.

Plumbing-brake line plumbing is standard on all chassis. All of the hard line plumbing is done. We now offer flex hoses, custom fit to each chassis build and including the connection hardware. Fuel Line plumbing is an option. Base hard lines are 3/8" or #6 in size. We can also do 1/2" #8 and 5/8" #10 in aluminum hard lines. Also available are premade stainless steel flex hoses from the tank to the hardline bulkheads. You may want to think about adding these.

Clutch-For you shifty guys, we can help. Pro Tech chassis these are firewall mount. For 67-72 C-10, we have a firewall mount plate that is designed to work with a 9" dual diaphragm booster and use the stock clutch pedal and a wilwood clutch master. this kit includes the pedal push rod and hardware. We are working on packages for other years and models.

If using LS Motor use Holley 302-2 oil pan* LT Motor uses 302-20 Holley Oil Pan

Custom fitted Ultimate Headers, SBC, LSX, LT and Coyote from $1595.00

-Will fit up to 10” wide front wheel with a 295 tire
-12” wide rear wheel with a 345 tire- will fit with wider wheel tubs

*** wheels on the chassis are Boyd HR22 front 18x10 and rear 18x12***

***Tires sizes front 285x35x18 Rear 315x30x18****

CHASSIS BUILD TIMES ARE ABOUT 12-14 WEEKS USUALLY BUT GIVE US A CALL TO DISCUSS.



Save this product for later

Authorized Dealers

A big THANK YOU to all of our amazing authorized dealers!

Shop by VehicleBuilder's Parts
NL

Why Us?

Testimonials

Level 7 Motorsports

via Google Reviews

We have ordered a few chassis’, wide rides, fat bars, fuel tanks, battery boxes, etc. Every order has been correct, on time, and communication is easy. Rob, Tina, and the whole crew are salt of the earth people. Always happy to do business with them! Thank you guys!

Jane Wilson

via Google Reviews

We bought a complete chassis for our 55 Chevy truck! We could not be happier with the chassis and the folks at No Limit! They did everything they said they were going to do and more! Spending the week in the Smokey Mountains this week and this truck handles great on these winding mountain roads! Heading over to No Limit today to show them the finished product!

Smooth Criminal: Project F100

via Google Reviews

I purchased a fat bar kit for my Ford truck. Since I was fairly close I asked if I could pick up at the shop to save shipping. During pick up everyone was friendly and showed me things around the shop. When I paid my bill I realized not only did I save shipping they knocked off another hundred for me picking it up. Oh and the parts I got were top notch. Definitely doing business again.

Kyle Polen

via Google Reviews

Them boys over there know how to build the best chasis you ever seen in your whole life. Make sure to send to color tech powder coatings for over 500 color varieties

John A.

via Google Reviews

Purchased rear 4 link and front IFS kits for my c10. Products fit really well and as described (great quality). I am a rookie installer and any questions I have the business is always more than willing to help over the telephone and in writing with great patience. I will continue to shop here since due to product quality and service.

rlovell383

via Google Reviews

Purchased a Wide ride and Fat bar setup, as well as gas tank, rear axle and brake set for my 57 Chevy truck. Rob and the crew worked with me to be sure I was getting exactly what I needed. Everything went together as it should. Could not be happier with the service and quality of the parts. After sale support is excellent. My only gripe is the instructions could sometimes be clearer, but certainly not a huge issue. Definitely would recommend No Limit.

Bo Gray

via Google Reviews

Called and they picked up on the first ring. Impy was very informative and helpful! Will be placing an order soon!

Jeffrey Burdess

via Google Reviews

These guys were great to deal with. Very polite and trustworthy.

Justin Mroz

via Google Reviews

Great shop to do business with. Very polite and on time, no BS kinda place.

NL

What We Do

Our Services

checking oil

Knowledgeable Staff

Our friendly and experienced team members are ready to help you.

truck on jacks

25 Years of Experience

We’ve been changing the hot rod industry for over two decades.

No limit

Unbeatable Products

You won’t find products made with more dedication and craftsmanship anywhere else.